Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC
Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC

Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC

Regular price $150.56 Save $-150.56
1 in stock

Happymodel Mobula7 Crazybee F4 Pro Whoop FPV Racing Drone with Upgrade BB2 ESC

Notice:  It was upgraded with F4 V2.0 Flight Controller.
              Will update product infomation asap.
              11.29

Specification:
Brand Name: Happymodel
Model: Mobula7 V2
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
   Basic Version: USB Charger
   Standard Version: 6-way Charger

Size: 98mm*98mm*36mm
Weight: 25.9g (without battery) ;

 

Flying weight: 40g (with Original 250mah lipo battery x2 )

Max Take Off Weight: about 44g


Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
Onboard 5A 4 In 1 ESC

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300M 
Onboard Frsky EU-LBT Version
(External XM receiver)
 

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Onboard DSM2 / DSMX receiver version
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
SE0802 16000KV Motor KV: 16000KV; Configu-ration: 9N12P
Support 1-2S Lipo; Stator Diamter: 8mm; Stator Length: 2mm
Shaft Diameter: Φ1.0; Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
Propeller 40mm 4-blade Propeller ( 4 CW 4 CCW)

5.8G VTX AIO Camera
 
Output power: 25mW;Input voltage: 3.3- 5.5V;Current consumption: 300mA(type)
Camera resolution: 700TVL; Field of view: 120°; Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm ( L*W ); Weight: 3g

3.8v 250mAh Lipo Battery
 Notes: Need 2pcs batteries for Series circuit

Connector: PH2.0
Continuous Discharge Rate: 30C; Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm; Weight: 6.5g
Features:
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- Smartaudio ready , change VTX bands, channels via OSD
  DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
- Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready

Package Included:
Basic Version
1x Mobula7 V2 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Mobula7 V2 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery

1x Screwdriver